C6 fluoried waterproof and oil repellent KF • Qingdao Dayin
.JPG)
Environmental Protection Fluoride waterproof agent KF
【Brief introduction】
This product is six carbon organic fluorine compound，tested by (ITS),not contains PFOA/PFOS，complies to European environmental requirements. Also suitable for the fabrics which exported to abroad. It can form a dense cross-linked film on the surface of fiber, and is used for waterproof finishing of various fiber fabrics. It has good waterproof effect.
Fabrics after finished will have excellent ability of water and oil proof .
Has good stability of producing
Has excellent continuous producing performance；
Little influence on dyeing fastness and color shade.
【Nature】
Appearance：white to grey emulsion
Ionic ：cationic
pH value：4.0～6.0（1% aqueous solution）
solubility：soluble in water in any ratio
【Application scope】
This agent used in the process of water/oil proof on polyester, nylon, cotton ,T/C, polyester / viscose fabric.
【Application dosage】
Polyester fabrics：Superproof KF 15 ~50 g/L （170℃×1min）
Nylon fabrics：Superproof KF 12 ~ 60 g/L （170℃×1min）
T/C fabrics :Superproof KF 20~60g/L （150℃×2min）
【Notice】
Please be sure to have a test before used together with other agents. Advise to dilute it with 2-3 parts of water, avoid to use it directly . and the fabrics must be washed clean before this process, or it will influence the effect of this agent. and baking processing must be adequate, if not, will affect its performance.
Please finished water proofing agent and prescription liquid within 12 hours, If working fluid has been put for long time, must confirm the stability and performance before use; preservation temperature is within 0℃~40℃, avoid freezing. After opening, pay attention to sealing, prevent volatilization, avoid open fire and direct sunlight.
Next product: Fluorine-based waterproof and oil repellent finishing agent CF-A
